Benchmarking every subsystem on four Lenovo M920q Proxmox hosts — NVMe, CPU, memory, and 10GbE network

Benchmarking Every Subsystem: NVMe, CPU, Memory, and 10GbE on Four Proxmox Hosts

TL;DR Prometheus and Grafana both crashed with I/O errors on the same node. Before assuming software, I ran a full hardware audit across all four Proxmox hosts — SMART health, NVMe disk benchmarks (fio), CPU benchmarks (sysbench), memory bandwidth tests, and 10GbE network throughput (iperf3). The result: all hardware is healthy. The I/O errors were Longhorn CSI virtual block device corruption, not physical disk failure. Along the way, I established baseline performance numbers for every subsystem and discovered that custom cooling makes a dramatic difference in thermal performance. ...

February 22, 2026 · 11 min · zolty
Homelab hardware selection

Choosing the Hardware: Why I Went with Lenovo M920q for My Homelab

TL;DR After researching rack servers, NUCs, and mini PCs, I settled on the Lenovo ThinkCentre M920q as my homelab node of choice. At roughly $100-150 used, each unit packs an Intel 8th-gen Coffee Lake CPU, supports up to 64GB DDR4, has an NVMe slot, and sips around 15-25W. Three of these running Proxmox VE give me a proper HA cluster without the noise, heat, or power bill of traditional rack gear. ...

February 7, 2026 · 5 min · zolty

Affiliate Disclosure: Some links on this site are affiliate links (Amazon Associates, DigitalOcean referral). As an Amazon Associate, I earn from qualifying purchases. This does not affect the price you pay or my editorial independence — I only recommend products and services I personally use and trust.